MeiTrack GT60 User's Guide download pdf (Page 7)

File Name:

MEITRACK GT60 User Guide

Creator:

Cavana Cheung

Project:

GT60

Creation Date:

Update:

2010-10-10

2013-06-26

Sub Project:

User Guide

Page:

- 7 - of 23

Revision:

V7.3

Confidential:

External Documentation

4.4.3 Press and hold the Power On/Off button for 3-5 seconds to activate GT60.

The device will then enter standby mode. It is suggested that you that you turn on

the device outside of all buildings to receive a better GPS signal.

Check that the Red LED (Battery) is flashing 1 second on and 2 seconds off.

Check that the Green LED (GSM) is flashing 0.1 second on and 2.9 seconds off.

Check that the Blue LED (GPS) is flashing 0.1 second on and for 2.9 seconds off.

5. Change Password

Command: W******,001,######

Description: Change user’s password.

Note:

1. ****** is user’s password and the default password is 000000. The tracker will only accept commands from a user with the

correct password. Commands with wrong password will be ignored.

2. ###### is the new password. Password should be 6 digits.

Example:

W000000,001,123456

W123456,001,999999

6. Time Zone

Command: W******,032,T

Description: Correct time to your local time

Note:

1. Default time of the tracker is GMT

2. This correction is applied to location reports by SMS and SMS alarms.

T=0, to turn off this function;

T=[-32768,32767] to set time difference in minute to GMT.

For those ahead of GMT, input the time difference in minutes directly.

For example, GMT+8, W000000,032,480 (8 Hours is 480 minutes).

‘-‘is required for those behind GMT. For example, W000000,032,-120 (2 hours or 120 minutes behind GMT).

Example:

W000000,032,480

W000000,032,-120

- 7 -

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Comments to this Manuals

No comments

MeiTrack GT60 User's Guide Page 7

Comments to this Manuals

Related products and manuals for Navigators MeiTrack GT60