MeiTrack MT90 User's Guide download pdf (Page 13)

MEITRACK MT90 User Guide

In deep sleep mode, if you want to obtain the location by SMS/call and the GPS cannot be positioned within 5 minutes, the

device will reply a link with the GPS map instead of location information.

After the device enters the deep sleep mode, functions of Track By Time Interval, Track By Distance, and GPSLog are not

available until you manually disable the sleep mode.

The device can be woken up from the sleep mode by pressing a key, call, or SMS. After an event is handled, the device will

enter the sleep mode again.

Example: 0000,A73,2

Reply: 353358017784062,A73,OK

7.5 Time Zone – B35

The command is used to modify the SMS report to display the correct local time zone. Default value: Beijing time, GMT480.

To change the time zone, follow the following instructions:

 SMS text:

0000,B35,480

Send the text to the embedded SIM card phone number.

 The MT90 automatically replies to the SMS: IMEI,B35,OK. It indicates that the time zone is set successfully.

Note: The time zone is in unit of minutes. The default time zone on the tracker is GMT 8 (480 minutes), and the time zone of

SMS reports is different from that of GPRS data packets. The GPS Log time zone is GMT 8.

When SMS minute is 0, the time zone is GMT 0 (default time zone).

When SMS minute is a value ranging from -32768 to 32767, set different time zones. Set the China time zone value to 480

(default value).

Example: 0000,B35,480

Reponding: 353358017784062,B35,OK (The time zone is set to Beijing time successfully.)

The digit is your MT90’s IMEI number.

8 Configured on a Computer

This section describes how to use Meitrack Manager to configure the MT90 on a computer.

Procedure:

1. Install the USB driver and Meitrack Manager.

2. Connect the MT90 to a PC with a USB cable.

3. Run Meitrack Manager, and start the MT90. Meitrack Manager will automatically detect the tracker model.

MeiTrack MT90 User's Guide Page 13