=0,cancle
=[1,4294967295] meter(s)
Distance interval is suggested to be set above 300 meters.
40 40 00 14 40 20 50 20 81 4F FF 43 03 33 30 30 9B C5 0D 0A
Above command will set interval as 300 meters.
$$<L><ID><0x4303><Flag><checksum> \r\n
Flag
=0x00, failure response;
=0x01, success response.
24. Delete Mileage – 0x4351
@@<L><ID><0x4351><checksum> \r\n
Delete total mileage of GPRS packets.
When mileage is deleted, the server should have a corresponding program to avoid
calculation mistake.
If mileage is accelerated to 4294967295 meters, it will be deleted automatically.
40 40 00 11 40 10 47 20 21 3F FF 43 51 40 48 0D 0A
$$<L><ID><0x4351><Flag><checksum> \r\n
Flag
=0x00, failure response;
=0x01, success response.
25. Reboot GPS – 0x4902
@@<L><ID><0x4902> <checksum>\r\n
Reboot the GPS module of the tracker.
40 40 00 11 12 34 56 FF FF FF FF 49 02 71 AC 0D 0A
$$<L><ID><0x4902><Flag><checksum> \r\n
Flag
=0x00, failure response;
=0x01, success response.
26. Heartbeat – 0x5199
@@<L><ID><0x5199><data><checksum> \r\n
Set time interval for heartbeat mode.
data=[0,65535], in ASCII code and in unit of minute
40 40 00 13 12 34 56 FF FF FF FF 51 99 31 32 24 89 0D 0A
Above command will set interval as 12 minutes. The tracker will send heartbeat (0x00)
data to the server every 12 minutes.
Comments to this Manuals